If you are labeling large quantities of finished lumber at a mill, lumber yard or manufacturer, you know how hard it is to do this in a timely manner. And you probably know that meeting UPC bar code requirements can be a job in itself. Manually stapling tags onto ends of lumber is not only time-consuming, but also tiring. That’s why Weber developed the improved FasTagger II lumber label end-tagger.

Like its predecessor, the original FasTagger, it's the automatic tagging tool that dispenses Weber Poly Tags and staples them securely in place — all in one step. This is the best way to get a branded UPC bar code label onto the end of finished lumber in large quantities quickly, efficiently and accurately.

The FasTagger II uses compressed air to apply tags at a rate of over 100 tags per minute. Your operator simply places the tool against the end of a piece of lumber and pulls the trigger. The FasTagger II automatically staples the tag to the lumber, cuts it, and then feeds the next tag into position. A special feed mechanism increases speed while decreasing chances for tag jam up.

Includes: FasTagger II, one pair of safety glasses, one box of staples (20,000), one pint of air tool oil, an operation manual and tag guides (7/8" & 11/16").

For information about compatible Polytag labels for the FasTagger II, call us at 1.800.843.4242 x217.

View Technical Specs (pdf)